Which filling machine should I select?
Selection depends on the approved product, viscosity or powder characteristics, container, fill quantity, accuracy, output and cleaning requirement.
Catalogue-based answer: Filling Machine Categories. Use the stated model, format and operating conditions when comparing this answer with your requirement.
Machine details that affect this decision
| Catalogue configuration | Published reference |
|---|---|
| Product or container fit | Approved bottles or jars with compatible liquids or pastes, from low to high viscosity. |
| Published output reference | Configuration-specific. Request the proposed model, head count and rated output for your dose and product. |
| Configuration and review limits | Cylinder range, piston recipe, valves, nozzle motion and cleaning method follow sample trials; anti-drip or diving nozzles are configurable. |
| Catalogue configuration | Published reference |
|---|---|
| Product or container fit | Published configuration for approved 500 mL–5 L HDPE containers; liquid suitability is trial-confirmed. |
| Published output reference | Four-head reference: up to 24 bottles/min, depending on fill volume and liquid characteristics. Order-specific model code is confirmed in the quotation. |
| Configuration and review limits | The published machine has four SS316 gear pumps with independent servo channels. Review the actual liquid, viscosity, container and required dose. |
| Catalogue configuration | Published reference |
|---|---|
| Product or container fit | Approved containers and liquids compatible with the selected meter technology. |
| Published output reference | Published four-nozzle reference: up to 36 bottles/min, depending on fill volume. Model code is assigned in the quotation. |
| Configuration and review limits | Electromagnetic, mass-flow or another meter is selected after product-property review. Confirm meter suitability and the actual dose/container. |
What to confirm for your application
Before selecting Filling Machine Categories, confirm these points for your application.
- Which actual liquid, powder or process duty is being selected rather than inferred from the family name?
- Which dosing or handling method addresses the stated product and container requirement?
- What differences in product path, tooling and cleaning must be reviewed between the proposed methods?
- Which sample trial and proposed datasheet will establish the chosen configuration?
Samples and information to send
For Filling Machine Categories, share the actual formulation and container drawings, required dose, product behavior at the proposed filling condition and target output. Identify the particular operating or selection question to resolve during the review.
Include the decision you need to make and any relevant sample identification or drawing revision. Ask for the proposed configuration and trial conditions in writing so that the answer applies to the equipment being quoted.
Review the machine and request a quotation
The Filling Machine Categories catalogue page provides the wider specification, options and related questions. A reference value or illustration does not approve a different container, material or process duty. Final suitability and supply scope are agreed against the application.
Discuss this machine requirement
Tell H M Pharma Machines which machine and question you are reviewing, then attach or describe the samples and data listed above.
Request a machine quotationView machine detailsTechnical basis: the linked public product catalogue. Keep the approved application, configuration and trial conditions with your purchasing record.