For approved bottles and compatible screw caps suited to linear handling, with single-file conveyor infeed with adjustable side and top guides.
Machine overview
H M Pharma Machines manufactures the Linear Type Capping Machine in Ahmedabad, Gujarat, India for pharmaceutical, nutraceutical, cosmetic, food, chemical and allied production applications.
The Linear Type Capping Machine uses single-file conveyor infeed with adjustable side and top guides for container and closure handling. Its approved process completes when closed containers continue inline without rotary star wheel transfer.
Detailed engineering for the Linear Type Capping Machine aligns variable-speed cap tightening, bottle sensing and cap-feed coordination with the approved application, target output, utility schedule and final line layout before the GA drawing is released.
Why this machine
The Linear Type Capping Machine is intended for approved bottles and compatible screw caps suited to linear handling; performance is assessed against the output and acceptance criteria stated for the approved configuration.
Single-file conveyor infeed with adjustable side and top guides.
Variable-speed cap tightening, bottle sensing and cap-feed coordination.
For the Linear Type Capping Machine, the materials and cleanability review follows this product-contact requirement: Closure-contact components, guides, star wheels and guarding are configured from approved bottle and cap samples.
Bottle and cap changeover covers conveyor guides, cap-feed path, top restraint and the spindle, belt or wheel settings used for the approved closure.
Closed containers continue inline without rotary star wheel transfer.
Operating process
Bottles remain on the inline conveyor as their caps are presented, stabilized and progressively tightened by the configured linear capping elements.
Bottles enter continuously between adjustable side and top guides that keep each container upright through the capping path.
An oriented cap is presented onto each bottle neck, and the capped bottle is guided squarely into the tightening section.
Stabilized bottles pass through the configured belts, spindles or wheels, which tighten each screw cap progressively to the approved closure setting.
Capped bottles continue directly along the same conveyor to inspection, labeling or packing without rotary star wheel transfer.
Applications & selection
Pharmaceutical bottles or vials with approved threaded closures are guided continuously through the linear cap-placement and tightening path.
Nutraceutical containers can be closed after cap geometry, neck finish, bottle rigidity and required tightening setting are validated together.
Cosmetic and personal-care packs are stabilized through the capping belts or spindles to protect approved pumps, screw caps or compatible closures.
Food and beverage bottles can use continuous inline tightening when the closure and container withstand the selected handling and top pressure.
Chemical and agrochemical containers require closure, liner, torque and product-compatibility review before the capping setup is released.
The linear capper can be synchronized with upstream filling and downstream inspection or labeling without transferring bottles through a rotary turret.
Technical details
| Machine | Linear Type Capping Machine |
|---|---|
| Category | Capping Machines |
| Suitable For | Approved bottles and compatible screw caps suited to linear handling |
| Working Principle | Oriented caps are placed onto bottles and stabilized containers pass through sequential tightening belts, spindles or wheels. |
| Infeed / Handling | Single-file conveyor infeed with adjustable side and top guides |
| Outfeed / Transfer | Closed containers continue inline without rotary star wheel transfer |
| Machine Construction | GMP-oriented stainless-steel construction as defined in the approved scope |
|---|---|
| Contact Materials | Closure-contact components, guides, star wheels and guarding are configured from approved bottle and cap samples. |
| Control System | Variable-speed cap tightening, bottle sensing and cap-feed coordination |
| Changeover | Settings, guides and format parts matched to approved samples or drawings |
| Optional Scope | Number of spindle sets, cap placement, torque verification and format range are configurable. |
| Line Integration | Standalone supply or integration with approved upstream and downstream machines |
| Model / Series | Configuration-specific. The model code is assigned in the approved quotation after the product, pack, process and automation scope are fixed. |
|---|---|
| Output / Throughput | Published reference. Up to 60 bottles per minute. |
| Accuracy / Acceptance Criterion | Configuration-specific. Torque, seal or closure acceptance criteria and the FAT method are defined after approved bottle-and-cap trials. |
| Electrical Power | Published reference. 230 V, single-phase, 50 Hz. |
| Utilities | Published reference. Vibratory screw-cap feeder with chute; 230 V, single-phase, 50 Hz electrical supply. |
| Overall Dimensions (L × W × H) | Published reference. 1200 × 800 × 2000 mm (L × W × H); conveyor height adjustable from 800 to 900 mm. |
| Net / Shipping Weight | Published reference. Approximately 300 kg net / 500 kg gross. |
| Capacity / Format Range | Published reference. Four screw-capping heads; screw caps 22–52 mm diameter; bottles 22–75 mm diameter and 55–200 mm height, with change parts where stated. |
| Warranty | Published reference. Manufacturing defects in stainless-steel components are covered; normal wear-and-tear parts, consumables and electrical components are excluded. The quotation does not state a warranty duration. |
| Installation / Commissioning Scope | Published reference. Pre-dispatch operational and maintenance training plus installation at buyer works; buyer arranges food and local transportation for the H M Pharma Machines engineer. |
Final specifications follow the approved quotation, layout, datasheet and project URS.
Options & project scope
Approved bottles and compatible screw caps suited to linear handling.
Number of spindle sets, cap placement, torque verification and format range are configurable.
Documentation for the Linear Type Capping Machine records variable-speed cap tightening, bottle sensing and cap-feed coordination, the confirmed utilities and the agreed acceptance tests; drawings, manuals and qualification records are supplied when ordered.
Controls & protection
Controls, alarms and interfaces are confirmed for the ordered configuration.
Variable-speed cap tightening, bottle sensing and cap-feed coordination.
Infeed readiness: single-file conveyor infeed with adjustable side and top guides.
Approved transfer: closed containers continue inline without rotary star wheel transfer.
Published reference: Vibratory screw-cap feeder with chute; 230 V, single-phase, 50 Hz electrical supply.
Configuration-specific: Torque, seal or closure acceptance criteria and the FAT method are defined after approved bottle-and-cap trials.
Number of spindle sets, cap placement, torque verification and format range are configurable.
Related machines
For the format drawings and change parts to review with the selected machine, read the machine change-parts guide.
Frequently asked questions
The Linear Type Capping Machine tightens caps while containers move continuously through an inline belt or wheel arrangement.
Suitable products and formats include approved bottles and compatible screw caps suited to linear handling. Final suitability is confirmed from approved samples, drawings and process details.
Oriented caps are placed onto bottles and stabilized containers pass through sequential tightening belts, spindles or wheels.
The Linear Type Capping Machine handles material using single-file conveyor infeed with adjustable side and top guides.
Capping speed depends on bottle pitch and stability, cap feeder capacity, closure placement, the number and speed of tightening elements and the required closure setting.
Bottle guides and top hold-down, cap chute and placement parts, tightening belts, spindles or wheels and recipe settings are matched to approved bottle-and-cap samples.
Bottle guides, top hold-down parts, cap chute, placement components and tightening belts, spindles or wheels are selected from approved container and closure samples.
The available control scope includes variable-speed cap tightening, bottle sensing and cap-feed coordination. Final alarms and interlocks are documented in the approved control specification.
Number of spindle sets, cap placement, torque verification and format range are configurable.
It follows the filling operation on the same conveyor and delivers closed bottles to inspection or labeling, with cap demand, bottle backup and start-stop signals exchanged as required.
The order can include bottle-and-cap format data, cap-feeder and closure-path drawings, tightening setup or torque test method, electrical and pneumatic diagrams, layout, manuals and capping FAT report.
Please provide the following: bottle and cap samples, torque, target output, conveyor height, cap feeder and upstream/downstream equipment.
Contact us
Share your application and required capacity for a quotation.