Peristaltic fillers meter liquid through flexible tubing while keeping it separate from the pump mechanism. This machine fills approved vials or bottles with primarily low-viscosity liquids, subject to product and tubing compatibility review.
Machine overview
H M Pharma Machines manufactures peristaltic pump filling machines in Ahmedabad, Gujarat, India. Each filling channel routes the liquid through an approved tubing set, fittings and nozzle; the liquid does not contact the pump mechanism. Filled containers then move to the selected stoppering or capping equipment.
For machine selection, review the liquid's viscosity and tubing compatibility together with the dose range, container sample and required output. Tubing material, bore and service life, pump calibration, channel count and nozzle arrangement must suit the approved liquid and operating conditions. Output and filling tolerance are confirmed for that configuration.
Send your liquid properties, fill volumes, container samples and production target for technical review. If the dosing method is still undecided, use our liquid filling machine selection guide to compare the available methods.
Why this machine
The Automatic Peristaltic Pump Liquid Filling Machine is intended for approved vials or bottles with primarily low-viscosity compatible liquids; performance is assessed against the output and acceptance criteria stated for the approved configuration.
Container indexing with individually routed tubing channels.
Independent pump-channel, recipe and anti-drip control with no-container/no-fill logic where included.
For the Automatic Peristaltic Pump Liquid Filling Machine, the materials and cleanability review follows this product-contact requirement: Product-contact materials, seals, tubing, valves and surface finish are matched to the product and cleaning method in the approved scope.
Product and dose changeover covers the approved tubing set, pump-channel recipe, filling needles and container guides for the selected format.
Filled containers discharge to stoppering or capping equipment.
Operating process
Rotating pump rollers compress flexible tubing and move a programmed dose from the product source to each container without the liquid contacting the pump mechanism.
Product tubing is routed through each pump head to its filling nozzle while empty containers are indexed into the filling station.
The machine holds each container beneath the corresponding tubing nozzle before authorizing the pump cycle.
The rollers sequentially compress the tubing and advance liquid according to the programmed pump rotations and speed.
The pumps stop when the programmed dose is complete, and the filled containers move to stoppering, capping or collection.
Applications & selection
Pharmaceutical liquids can be dosed through a qualified disposable or cleanable tubing path selected for the formulation and batch process.
Nutraceutical preparations are suitable when viscosity, particles, tubing life and the required dose range match the selected pump head.
Cosmetic and personal-care liquids can use peristaltic dosing after tubing compatibility, suction conditions and product recovery are evaluated.
Food and beverage products require product-grade tubing and a hygienic connection and changeover procedure approved for the application.
Oils, chemicals and agrochemicals are considered only when the tubing, fittings and nozzle resist the product throughout the intended service life.
The peristaltic filler can operate independently or synchronize indexed containers with upstream supply and downstream closure equipment.
Technical details
| Machine | Automatic Peristaltic Pump Liquid Filling Machine |
|---|---|
| Category | Liquid Filling Machines |
| Suitable For | Approved vials or bottles with primarily low-viscosity compatible liquids |
| Working Principle | Pump rollers compress flexible tubing and advance a calibrated liquid dose according to programmed rotations and speed. |
| Infeed / Handling | Container indexing with individually routed tubing channels |
| Outfeed / Transfer | Filled containers discharge to stoppering or capping equipment |
| Machine Construction | GMP-oriented stainless-steel construction as defined in the approved scope |
|---|---|
| Contact Materials | Product-contact materials, seals, tubing, valves and surface finish are matched to the product and cleaning method in the approved scope. |
| Control System | Independent pump-channel, recipe and anti-drip control with no-container/no-fill logic where included |
| Changeover | Settings, guides and format parts matched to approved samples or drawings |
| Optional Scope | Tubing material and bore, number of channels, filling needles and disposable-path arrangement are configurable. |
| Line Integration | Standalone supply or integration with approved upstream and downstream machines |
| Configuration / Model | Automatic peristaltic pump liquid filler. The final model code is assigned in the approved quotation. |
|---|---|
| Containers / Dose Range | Approved vials or bottles with primarily low-viscosity compatible liquids. Dose range and container dimensions are agreed after product and tubing-compatibility review. |
| Dosing Method | Pump rollers compress flexible tubing; programmed pump rotations and speed deliver the calibrated liquid dose through the filling nozzle. |
| Channels / Controls | Containers index beneath individually routed tubing channels. Channel count, tubing bore, filling needles, anti-drip control and any no-container/no-fill logic follow the approved scope. |
| Output Evaluation | Evaluate containers per minute at the agreed dose, tubing bore and resilience, pump speed, channel count, suction/discharge conditions and indexing time. |
| Acceptance / FAT Basis | Fill tolerance and FAT sampling conditions are agreed for the approved liquid, dose and container. Pump calibration and tubing life are included in qualification. |
| Product Contact / Cleaning | The liquid contacts approved tubing, fittings and nozzle rather than the pump mechanism. Tubing material, life and cleaning or disposable-path arrangement are agreed for the product. |
| Electrical / Utilities | Voltage, phase, frequency and connected load follow the approved load list. Product-feed and any pneumatic, temperature-control or cleaning services are listed for the selected arrangement. |
| Footprint / Line Interfaces | Final length, width and height are stated in the approved GA drawing, with product-source connection, indexed-container handling and stoppering or capping transfer defined. |
| Dose / Format Change | Verify compatible tubing and fittings, pump calibration, rotation recipe, nozzle and container guides with the approved liquid, dose and pack. |
| Warranty | Order-specific. Duration, commencement date, covered parts, exclusions and claim terms are stated in the approved quotation or order. |
| Installation / Commissioning Scope | Order-specific. The quotation states whether installation, commissioning, SAT and operator training are included, together with unloading, positioning, utilities, civil work, trial materials, travel and site responsibilities. |
Final specifications follow the approved quotation, layout, datasheet and project URS.
Options & project scope
Approved vials or bottles with primarily low-viscosity compatible liquids.
Tubing material and bore, number of channels, filling needles and disposable-path arrangement are configurable.
Documentation for the Automatic Peristaltic Pump Liquid Filling Machine records independent pump-channel, recipe and anti-drip control with no-container/no-fill logic where included, the confirmed utilities and the agreed acceptance tests; drawings, manuals and qualification records are supplied when ordered.
Controls & protection
Controls, alarms and interfaces are confirmed for the ordered configuration.
Independent pump-channel, recipe and anti-drip control with no-container/no-fill logic where included.
Infeed readiness: container indexing with individually routed tubing channels.
Approved transfer: filled containers discharge to stoppering or capping equipment.
Configuration-specific: Electrical supply, compressed air, product feed or temperature control, gas or vacuum, and cleaning or CIP interfaces are listed as applicable.
Configuration-specific: Filling tolerance and the FAT sampling method are guaranteed only for the approved product, dose, container and operating conditions.
Tubing material and bore, number of channels, filling needles and disposable-path arrangement are configurable.
Related machines
For dosing-method selection using product and container samples, read the liquid filling machine selection guide.
Frequently asked questions
The Automatic Peristaltic Pump Liquid Filling Machine meters controlled liquid doses while keeping the product isolated inside an approved flexible tubing path.
Suitable products and formats include approved vials or bottles with primarily low-viscosity compatible liquids. Final suitability is confirmed from approved samples, drawings and process details.
Pump rollers compress flexible tubing and advance a calibrated liquid dose according to programmed rotations and speed.
The Automatic Peristaltic Pump Liquid Filling Machine handles material using container indexing with individually routed tubing channels.
The rated output in containers per minute depends on dose, tubing bore and resilience, pump-head speed, number of channels, suction and discharge conditions and indexing time.
Compatible tubing and fittings, pump calibration, rotation recipe, nozzle and container guides are verified with the approved liquid, dose and pack; tubing life is part of the qualification.
The liquid contacts the approved flexible tubing, fittings and nozzle rather than the pump mechanism; tubing grade and life, frame construction and guarding are recorded in the machine datasheet.
The available control scope includes independent pump-channel, recipe and anti-drip control with no-container/no-fill logic where included. Final alarms and interlocks are documented in the approved control specification.
Tubing material and bore, number of channels, filling needles and disposable-path arrangement are configurable.
The filler connects the product source to indexed containers through the tubing path, then releases filled packs to stoppering, capping or collection with container-presence and line-status interlocks.
The order can include tubing and product-path specification, pump calibration and tubing-life procedure, electrical and utility information, layout, cleaning or changeover instructions, manuals and filling FAT report.
Please provide the following: product and tubing compatibility, dose range, container samples, output, accuracy and aseptic-process requirement.
Contact us
Share your application and required capacity for a quotation.