☎ +91 97379 73334✉ info@hmpharmamachines.com
H M Pharma Machines
Four-Head Automatic Liquid Filling System

Automatic 4 Head Servo Gear Pump Liquid Filling Machine

Automatic filling machine for approved 500 mL to 5 L HDPE containers, equipped with four filling nozzles, four SS316 gear pumps and four independently driven Delta servo motors.

500 mL to 5 L filling range
Up to 24 bottles per minute
Four 1/2-inch SS316 gear pumps
Delta PLC, 7-inch HMI, VFD and servos
Get Machine QuoteWhatsApp Us
Automatic 4 Head Servo Gear Pump Liquid Filling Machine manufactured in India by H M Pharma Machines
Four-head servo gear pump liquid filling system for approved 500 mL to 5 L HDPE containers
GMP-Oriented EngineeringApplication-Matched DesignInstallation SupportAfter-Sales Service

Machine overview

Automatic 4 Head Liquid Filling Machine Manufacturer in India

H M Pharma Machines manufactures this automatic four-head servo gear pump liquid filling machine in Ahmedabad, Gujarat, India for approved HDPE containers from 500 mL to 5 L.

Four 750 W Delta servo motors drive four 1/2-inch SS316 gear pumps. The four filling nozzles operate under PLC and HMI control, with specified filling accuracy of ±1% subject to the approved liquid, container and operating conditions.

The machine is rated up to 24 bottles per minute. Final liquid suitability, viscosity range and rated output are confirmed through sample review and machine trials.

Configuration summary

Confirmed Four-Head Filling Configuration

The published figures below are taken from the confirmed machine configuration; final performance remains subject to the approved liquid and container trial.

500 mL-5 LApproved HDPE container range
Up to 24 BPMDepends on fill volume and liquid
4 HeadsFour nozzles and four gear pumps
±1%Specified filling accuracy

Why this machine

Key Features of the Automatic 4 Head Servo Gear Pump Liquid Filling Machine

01

Four Independent Filling Channels

Four filling nozzles are supplied with four 1/2-inch SS316 gear pumps for simultaneous operation.

02

Delta Servo Drive

Each filling channel is driven by a dedicated 750 W Delta servo motor.

03

Delta Automation

Delta PLC, 7-inch Delta HMI, Delta VFD and Delta servo controls are provided.

04

GMP Construction

Product-contact parts are SS316 and the external machine cladding is SS304.

05

Confirmed Container Range

The machine is configured for approved 500 mL to 5 L HDPE containers with a maximum bottle height of 300 mm.

06

Production Safety

No-container/no-fill logic, automatic shut-off, emergency stop and overload protection are included.

Operating process

How the Four-Head Servo Gear Pump Filling Cycle Works

The left-to-right conveyor carries approved containers through a four-stage automatic filling cycle.

Step 01

Container Infeed

Approved HDPE containers enter on the 150 mm wide conveyor.

Step 02

Filling Position

The machine positions containers below the four filling nozzles; no-container/no-fill logic prevents an empty cycle.

Step 03

Servo Gear Pump Filling

Four Delta servo motors drive the four SS316 gear pumps for the programmed fill.

Step 04

Automatic Discharge

Filled containers leave the filling station on the left-to-right conveyor for the next line operation.

Application & project selection

Configured for the Approved Container and Liquid

500 mL to 5 L Range

Published container range for the confirmed machine configuration.

Approved HDPE Containers

Container size, neck and stability are checked against supplied samples.

Four-Head Production

Four filling nozzles operate with four dedicated gear-pump and servo channels.

Liquid Trial Confirmation

Liquid suitability, viscosity range, fill accuracy and rated speed are finalized through trials.

Automatic Conveyor Handling

A 12-foot conveyor carries containers from left to right at an adjustable working height.

Line Integration

The filling machine can discharge containers to the approved downstream equipment.

Technical details

Automatic 4 Head Servo Gear Pump Liquid Filling Machine Specifications

4 NozzlesFour filling channels
4 x 750 WDelta servo motors
8 CFMCompressed air at 6 bar
300 kgApproximate net weight
Filling & Container Configuration
MachineAutomatic 4 Head Servo Gear Pump Liquid Filling Machine
Filling Range500 mL to 5 L
ContainerApproved HDPE containers
Maximum Bottle Height300 mm
OutputUp to 24 bottles per minute, depending on fill volume and liquid characteristics
Filling Nozzles4
Gear Pumps4 x 1/2-inch SS316 gear pumps
Filling Accuracy±1%, subject to approved liquid and operating conditions
DirectionLeft to right
Controls, Construction & Utilities
Servo Motors4 x 750 W Delta servo motors
PLCDelta
HMI7-inch Delta HMI
VFD / DriveDelta
Product-Contact PartsSS316
Machine CladdingSS304
Electrical Supply440 V AC, 3 phase, 50 Hz; approximately 4 kW
Compressed Air8 CFM at 6 bar
Conveyor12 ft long, 150 mm wide; adjustable height 800 to 900 mm
Overall Dimensions3648 x 800 x 2000 mm
WeightApprox. 300 kg net / 500 kg gross

Liquid suitability, viscosity range, fill accuracy and rated output are finalized through approved sample trials.

Machine scope

Confirmed Construction, Controls and Line Details

Container Range

Approved 500 mL to 5 L HDPE containers, with maximum bottle height of 300 mm.

Filling Assembly

Four nozzles, four 1/2-inch SS316 gear pumps and four 750 W Delta servo motors.

Conveyor Interface

Left-to-right, 12-foot conveyor with 150 mm width and 800 to 900 mm adjustable height.

Trial-Based Approval

Final liquid suitability, viscosity range and rated output are confirmed from trials with the approved sample.

Controls & protection

Confirmed Operating Controls and Safety Interlocks

The machine uses a Delta automation package with the following confirmed production controls and protections.

No Container, No Fill

Filling is inhibited when a container is not present at the filling position.

Automatic Shut-Off

The filling sequence includes automatic shut-off control.

Emergency Stop

An emergency-stop circuit is provided for operator safety.

Overload Protection

Electrical overload protection is included in the machine control system.

Delta PLC & HMI

Sequence control is handled by a Delta PLC with a 7-inch Delta HMI.

Delta Motion Control

Delta VFD and four 750 W Delta servo motors control the conveyor and filling channels.

Related machines

Explore Related Filling and Capping Machines

Bottle Liquid Filling MachineVolumetric Liquid Filling MachineServo Torque Capping MachineView All Product Categories

Frequently asked questions

Automatic 4 Head Servo Gear Pump Liquid Filling Machine FAQs

Confirmed answers covering capacity, controls, construction, utilities and machine dimensions.

What is the filling range of this machine?

The confirmed filling range is 500 mL to 5 L for approved HDPE containers.

What production output is available?

The machine is rated up to 24 bottles per minute, depending on the fill volume, liquid characteristics and approved container.

How many filling nozzles and pumps are provided?

The machine has four filling nozzles and four 1/2-inch SS316 gear pumps.

Which servo motors are used?

Four 750 W Delta servo motors are used, one for each filling channel.

What filling accuracy is specified?

The specified filling accuracy is ±1%, subject to the approved liquid, container and operating conditions.

Which controls are used?

The machine uses a Delta PLC, 7-inch Delta HMI, Delta VFD and Delta servo system.

What are the electrical and pneumatic requirements?

The electrical supply is 440 V AC, three phase, 50 Hz with approximately 4 kW connected load. Compressed air requirement is 8 CFM at 6 bar.

What conveyor configuration is supplied?

The conveyor runs left to right, is 12 feet long and 150 mm wide, with an adjustable working height of 800 to 900 mm.

Which construction materials are used?

Product-contact parts are SS316 and the machine cladding is SS304.

Which safety interlocks are included?

Confirmed controls include no-container/no-fill logic, automatic shut-off, emergency stop and overload protection.

What are the machine dimensions and weight?

Overall dimensions are 3648 x 800 x 2000 mm. Approximate net weight is 300 kg and gross weight is 500 kg.

How is final liquid suitability confirmed?

Final liquid suitability, viscosity range and rated output are confirmed through sample review and machine trials.

Contact us

Discuss Your Automatic 4 Head Servo Gear Pump Liquid Filling Machine Requirement

Contact H M Pharma Machines for sample review, technical discussion and quotation.

☎ +91 97379 73334✉ info@hmpharmamachines.com📍 Ahmedabad, Gujarat, India
Call NowWhatsApp
WhatsApp Us